Frequently Asked Questions About Bonzai Trees
Practiced for centuries in China and Japan, bonsai is
the reproduction of natural tree forms in miniature. Bonzai trees are
living miniature trees which increase in beauty and value as they mature
over the years.
How often should I water my bonzai tree?
Unlike a houseplant, bonzai trees use a "free draining" type
of soil because their roots cannot tolerate "wet feet". In
addition, they are grown in significantly less soil and, therefore require
more watering. Factors such as tree location, temperature, lighting
conditions, quantity of soil used, and the changing seasons will determine
the frequency of watering. You can get to know when your tree needs
to be watered by observing the foliage, testing the soil with your index
finger just below the surface, or just by the weight of the pot. (The
drier the tree, the lighter it will feel.) To take the guesswork out
of watering, we recommend an inexpensive moisture meter which works
very much like a thermometer. Insert it into the soil and the movement
of the needle will tell you if it is time to water.
How often should I re-pot my bonzai tree?
All potted plants will eventually outgrow their containers. While houseplants
need to be "up-potted", that is, placed in larger and larger
containers, we maintain the miniaturization of a bonsai tree by keeping
the roots confined to the small container. On average, repotting will
be necessary every 3-5 years, but the tree should be removed from its
container and its root system inspected once a year. If the roots form
a circular ball around the perimeter of the pot, it is time to trim
the roots and repot. When repotting remember to (a) use only bonzai
soil (b) remove air pockets by working the soil down through the roots
(c) do not remove more that 20% of the root system (d) repot during
the appropriate repotting season (e) water well and keep out of the
sun for a week or two.
How often should I fertilize my bonzai tree?
Because bonzai trees are cultivated in limited amounts of soil, adequate
feed is very important. As a general rule, a small amount of feed is
given in the spring and a larger amount in the fall. Feed for bonzai
should contain three principle ingredients; nitrogen, phosphoric acid,
and potash. It is also a good idea to use a fertilizer containing "chelated"
iron. Water before fertilizing your tree and then apply at half the
strength recommended by the brand's manufacturer. We rotate the use
of brands since different manufacturers add different amounts of trace
elements and minerals. We also add Superthrive which is a vitamin supplement
to our fertilizer mix. You may find it simpler and easier to use slow
release fertilizer granules (placed over the soil) whose nutrients are
released with each watering.
How often should I mist my bonzai tree?
All trees grow in more humid conditions than our homes, offices and
dormitories. So what can we do to provide this essential humidity ?
Misting the tree is only beneficial for a short time, so what we recommend
is to place the tree on a humidity tray and add water to the tray. As
the water in the tray evaporates it creates a humid environment around
the tree 24 hours a day. When the water in the tray is gone, add more
water. It's a good idea to separate the pot from the water in the tray
by adding some pebbles to the bottom of the tray. This will prevent
any roots from sitting in the water.
How much sunlight is required for my bonzai tree?
Sunlight, especially the ultra-violet ray, affects the growth of trees.
Therefore, except in special cases such as immediately after repotting,
extensive trimming, etc, bonzai should be placed in a sunny location.
Bright light will also work well but the tree should not be placed more
than 12" away from the direct light source. An east, west or southern
exposure works best. A northern exposure will require the use of "grow
lights" which should remain on up to 16 hours each day and the
lamp should not be more than 2 inches from the top of the tree. Incandescent
light is too hot and will not provide the various spectrum of light
that is required to maintain your bonzai tree. If you do not have a
window or light source that provides an east, west or southern exposure,
be sure to select a bonzai tree that does well in lower lighting conditions.
How is miniaturizing a tree possible?
No one single technique is adequate to make a tree small. The fact that
the tree is grown in a container, the trimming, pruning, repotting and
other care given the tree -- all contribute to the final result of limited
growth. Dwarf trees are often found in a natural environment, but in
bonzai this environment is provided artificially. Bonzai are grown in
shallow containers the size of which determines the amount of soil the
roots are able to grow in. This environment definitely restricts the
growth of the roots and its functions.
How do I trim and prune my bonzai?
The main objective of trimming and pruning is to shape the bonzai into
the desired form and to reduce growth above ground in order to maintain
a balance with root growth. The process of shaping begins when the tree
is very young and is on-going as it continues its growth. Trimming is
accomplished by using a sharp scissors or shears. This traditional tool
is called butterfly shears or bonsai shears and is used for removing
foliage and light branches. When heavier branches are removed, we call
it pruning and the tool to use is the concave cutter, for which there
is no substitute. The concave cutter allows you to remove small, medium
and even large branches without leaving any visible scars. Some trees
such as the Juniper should be trimmed by using the thumb and index finger
to remove new growth and to prevent browning and a "sheared"
appearance.
How do I prevent diseases and insects from infecting
my bonzai?
As living trees, bonzai are susceptible to insect attacks and disease.
Preventive and corrective measures include (a) keeping your bonzai in
good health, since insects and bacteria tend to attack weak trees, (b)
giving your tree ample light, fresh air and ventilation, (c) keeping
the soil free of spent blooms and fallen leaves etc. You may also use
an insecticidal soap spray which is not harmful to humans or animals.
This soap derivative, however, may require more than one application
to control the insect population. It's also a good idea to use this
spray weekly to prevent any attacks.
How do I train my bonzai?
Wiring, a relatively modern method of training bonsai trunks and branches
into the desired forms, has become commonly accepted. It is often used
in place of, or in conjunction with the traditional methods of long-term
pruning and hemp-rope binding. Copper wire that has first been annealed
in a low-temperature fire is preferred. After it has cooled, it is wrapped
around the branches in the direction the branch is to be bent. The branch
should be bent once into its final position so as not to harm the cambium
layer under the bark. The wire should be wrapped taut, but not too tight,
and should be removed just before it bites into the branch -- between
6 and 12 months. The wire is removed with a bonsai wire cutter by snipping
the wire at each turn, thereby allowing the cut pieces to fall to the
ground. Never unwind the wire or use pliers to cut the wire, since this
will damage the branches.
What is bonsai soil and why is it used for bonzai?
As noted previously, potted trees do not do well in soil that is always
wet. Potting soil and top soil are heavy soils that can remain wet for
weeks. Bonzai soil is a mixture of ingredients which allows the water
to drain freely and at the same time, retain moisture. In addition,
the ingredients allow the roots to breathe air and prevent compaction.
There are two basic types of bonsai soil -- a conifer mix and a tropical/sub/tropical
mix. Before adding any soil mixture, be sure to cover the drainage hole(s)
with screening to prevent the soil from washing out of the pot. When
re-potting, it is always best to use the soil mixture in its dry state.
This info has been taken from Bonsai Boy's FAQ
page.
For any further info, please visit BONSAI
BOY
